ELZAB Prima 2 User Manual page 19

– TRANSMITTING THE MINUS
Setting value
^
– TRANSMITTING THE RESULT FRAME
Setting value
^
– STABILITY WAITING TIME
Setting value
^
– DATA RECEIVING LOCK
Setting value
^
– TRANSMISSION KEY LOCK
Setting value
^
– CONFIGURATION RECEIVING LOCK
Setting value
^
ELZAB S.A.
ONLY POSITIVE
POSITIVE AND NEGATIVE
ONLY STABLE
STABLE AND UNSTABLE
0 SECOND
1 SECONDS
2 SECONDS
4 SECONDS
6 SECONDS
8 SECONDS
10 SECONDS
12 SECONDS
LOCK OFF
LOCK ON
LOCK OFF
LOCK ON
LOCK OFF
LOCK ON
The negative result is considered as unstable and is not sent.
The negative result can be sent if it is stable.
The result frame is sent only when the result is stable.
The result frame is sent after stabilizing the result or after the time witch
is set in "STABILITY WAITING TIME" menu
hasn't stabilized during that time the frame that is sent contains the
signs 0x20 in place of the result digits.
Specifies the waiting time for stabilizing the result. Time runs from the
moment of requesting the result by key pressing or serial interface. If
the time was set at 0 seconds the result must be stable at the
moment of requesting the result.
The scale receives the commands via the CASH REGISTER/PC
CONNECTOR.
Receiving the data via the CASH REGISTER/PC CONNECTOR is
locked.
Data can be transmitted by using the
Transmission of the data by using the
Receiving the data from ELZAB cash registers
for automatic configuration of the scale is unlocked.
Receiving the data from ELZAB cash registers
for automatic configuration of the scale is locked.
Meaning
Meaning
. If the result
Meaning
Meaning
Meaning
key.
key is locked.
Meaning
User Manual PRIMA 2 scale 17