Advertisement
MENU button
• One short press: entering into the first menu of the settings.
1 GPS receiver
(vid: p. 8,
• Every following short press: jumping to the next setting in the
menu.
• After 5 seconds of inaction, the device will exit from the settings
automatically.
MODE button
a) Adding/deleting user coordinates
• While driving (above 10 km/h (6.21 mph) and with an active
GPS connection) press the MODE button to add your current
position to your User Coordinates. These points can be, for
example, new speed camera locations, that were not in the
database before. The device will state the saving of the new
coordinate in the selected language. The maximum number
of User Coordinates is 50.
• A previously added User Coordinate can be deleted two ways.
The first option is when you are closing to the saved coor-
dinate, wait until the device warns you and then press the
MODE button to remove the given coordinate. The device will
state if the coordinate had been successfully removed. This
function works only with active GPS connection and above
10 km/h (6.21 mph).
•
All of the saved User Coordinates can be deleted in the
FACTORY RESET
b) Enabling and disabling functions in Settings.
c) By pressing and holding the MODE button for 4 seconds, the
Radar Detector module can be turned on or off. A displayed text
and a beeping sound indicates the activation and deactivation.
(Vid: p. 19, "Startup of the device")
function)
menu.
7
㉑
Advertisement
