Advertisement
Quick Links
Advertisement
Summary of Contents for Kiyo GPS800
- Page 1 USER MANUAL...
-
Page 3: Operation Of The Device
1. PURPOSE OF THE GPS DETECTOR The purpose of the device is to ensure the safe driving conditions, by warning the driver to Fixed Speed Cameras, Section Control Zones, Red Light Cameras and other risks. To do so, the detector uses a free and upgradeable GPS database. -
Page 4: Installation
3. INSTALLATION a) Accessories Central Unit Bracket Velcro tape Cigarette Lighter Power USB Cable User Manual Cable (with a spare fuse) USER MANUAL Optional accessories Radar Detector module GPS receiver... - Page 5 b) Finding the perfect location for the device For the best efficiency, ensure that the logoed side of the device has a clear view to the sky. Be warned that metallic parts might interfere with the connection between the Detector and the satellites, there- fore make sure that there are no such parts above the device.
- Page 6 WARNING! Some manufacturer might place a protective plastic film on the windscreen of their latest vehicles. The bracket may leave a mark on these windscreens; therefore check your vehicle’s user manual for information regarding your windscreen. Mounting to dashboard • Locate a suitable mounting location and clear that spot thoroughly.
- Page 7 d) Setting the device up • The power cable of the cigarette lighter goes into the POWER socket. (Vid: “Accessories”, POWER p.2.) • The mini USB connector of the USB cable goes to the USB socket. (Vid: “Accessories”, p.2.) • The optional Radar Detector module can be attached to the OPT socket.
- Page 8 WARNING! Without GPS connection, most of the device’s functions are disabled. (e.g.: SMART MUTE, GPS database, etc…) 4. USE OF THE GPS DETECTOR POWER POWER a) Controls of the GPS Detector POWER Power socket USB socket POWER Radar Detector Module MENU MENU socket...
- Page 9 MENU button • One short press: entering into the first menu of the settings. 1 GPS receiver function) (vid: p. 8, • Every following short press: jumping to the next setting in the menu. • After 5 seconds of inaction, the device will exit from the settings automatically.
- Page 10 The following tables will show the available options of the device. The system includes 21 menus, one for every function of the device. c) Functions of the GPS Detector WARNING! Upon some software updates, certain points of the menu system may change. For the proper use of the device, always use the manual from our homepage.
- Page 11 3 Setting GMT (default: +1) The time zone is not updated automatically upon changing to or from Daylight Saving Time; the current time must be adjusted manually. Display Function Displaying GMT between Setting Time Zones 4 Database of the Fixed Speed Camera locations (Default: ON) The database contains the locations of the fixed speed cameras and of those that are built into traffic lights.
- Page 12 7 Dangerous zones database (Default: ON) The database contains the locations of dangerous crossroads, rail cross- ings, etc. Display Function Indicating Dangerous Zones: ON Indicating Dangerous Zones: OFF 8 SRA – Smart Radar Activation (Default:ON) By enabling, the number of false alarms can be reduced, because the device will only warn to speed cameras that are saved in the database.
- Page 13 ⓫ Displaying maximal speed Displaying the maximal speed measured since the latest update of the device. Display Function Displaying maximal speed. ⓬ Distance Alert (Default: 500m) Recommended: 750 m on freeways and 250 m in cities. Display Function Displaying Distance Alert menu. Setting Distance Alert ⓭...
- Page 14 ⓯ Detecting X-band (Default: OFF) Here, you can turn on or off the function, whether the attachable Radar Detector module should detect the X-band or not. Display Function X-band: ON X-band: OFF ⓰ Detecting K-band (Default: OFF) Here, you can turn on or off the function, whether the attachable Radar Detector module should detect the K-band or not.
- Page 15 ⓳ Software version In this menu, you can check the software version number of the device. Display Function Displaying software version number. ⓴ Database version In this menu, you can check the database version number of the device. Display Function Displaying database version number.
- Page 16 AUDIO AND VISUAL SIGNALS DISPLAY DESCRIPTION SOUND Turning On Searching for If the Boot Tune function is atctivated: GPS signal “Fasten your seat belt.”. While driving (if there are no other signals displayed) Current Unit: based on settings Speed No sound signal In case of stationary car (if there are no other signals displayed) GPS time No sound signal...
-
Page 17: Specifications
DISPLAY DESCRIPTION SOUND APPROACHING TO USER POINT User Warning, User Point ahead! Coordinates Creating new User Coordinate User Point added Detecting X-band X-band X-band + beep sound level 1 Detecting K-band K-band K-band + beep sound level 2 Detecting KA EURO-band Ka-band Ka EURO-band + beep sound level 3... -
Page 18: Main Features
5. MAIN FEATURES • Customizable alarm system. • Radar band detection that can • Free updates for the GPS be switched on or off (X-band, database. K-band, KA-band). • Detecting Fixed Speed Came- • Displaying current average ras. speed. • Detecting Radar signals (with •... - Page 19 Attaching the Radar Detector module (Additional equipment, the basic package does not include it) 1. PURPOSE OF THE ATTACHABLE RADAR DETECTOR MODULE The purpose of the Radar Detector Module is to increase the effec- tiveness of the GPS Detector, by detecting the mobile radar speed traps.
- Page 20 By enabling the Smart Radar Activation feature, the number of false alarms can be decreased, because the device will only signal upon closing on a speed trap that is in the GPS database. 3. INSTALLATION a) Accessories of the Radar Detector Module Mounting brackets, screws Positioning the module b) Fastening the device...
- Page 21 • After deciding between the horizontal or vertical placement, screw the bracket together (with or without the deflector), then mount the device to the bracket. The device can be placed into the lattice of the front bumper as well, because the detection range is 180°. •...
- Page 22 By enabling the Smart Radar Activation feature (vid: p. 10, “Smart Radar Activation”), the number of false alarms can be decreased, be- cause the device will only signal upon closing on a speed trap that is in the GPS database. Warning! This feature is only available in Hungary! 4.
- Page 24 DISTRIBUTOR / SERVICE CENTER CONTACTS: EURO NOLIKER KFT. (POWERTUNING) Adress: Textilgyari ut 3., HU-6725 Szeged, Hungary MAIL: info@powertuning.hu Phone numbers: +36 21 200 0900 +36 62 202 303 +36 30 852 5460...