Advertisement
• After deciding between the horizontal or vertical placement, screw
the bracket together (with or without the deflector), then mount
the device to the bracket. The device can be placed into the lattice
of the front bumper as well, because the detection range is 180°.
• Metallic elements may disturb the radar detection, therefore if
the front bumper is made of metal, the detector should be placed
into the grille.
c) Setting the device up
• Connect the jack plug of the Radar Detector module into the OPT
socket of the GPS Detector.
• By pressing and holding the MODE
button for 4 seconds, the Radar De-
tector Module can be turned on or
off, which is indicated with a displayed
text and a beeping sound.
4. USE OF THE RADAR DETECTOR MODULE
After connecting the module to the GPS Detector, the device is ready
to use.
Warning! The Radar Detector Module is only functional with the
GPS Detector.
When the Radar Detector identifies a radar signal, the GPS Detector
warns the driver in the selected language; displays the type of the
signal (from 1 to 7) and indicates the distance with a beeping sound.
The more frequent the beeping sound, the closer the speed trap is.
If the Smart Mute option is enabled on the GPS Detector (vid: p.
2
9,
), "Smart Mute"), the device gives warning only if the driver is
overspeeding.
19
Advertisement
