Download  Print this page

Installation Requirements; Tools And Parts - Whirlpool WGD85HEFC Installation Instructions Manual

Hide thumbs

Advertisement

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools and parts before starting installation.
Tools needed for all installations:
Flat-blade screwdriver
¼" and
5
/
" nut driver
16
(recommended)
Tape measure
Utility knife
Caulking gun and
compound (new vent
installations)
4
#2 Phillips screwdriver
Level
Pliers
Tin snips (new vent
installations)
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Tools needed for gas installations:
8" or 10" pipe wrench
Pipe-joint compound
resistant to LP gas
Parts supplied (all models):
Leveling legs (4)
Parts supplied (steam models):
"Y" connector
Rubber washer
Parts package is located in dryer drum. Check that all parts
are included.
NOTE: Do not use leveling legs supplied with dryer if installing
with a pedestal or a stack kit.
Parts needed:
(Not supplied with dryer)
Vent clamps
Vent elbows and vent work
8" or 10" adjustable wrench
(for gas connections)
2' (0.6 m) inlet hose

Advertisement

loading

  Related Manuals for Whirlpool WGD85HEFC