Table of Contents
Advertisement
Quick Links
STORM
INSTRUCTIONS FOR
900W 230V
Biscuit Jointer
Stock No.83611
Part No.PT8100SF
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper Storm Force PT8100SF
Summary of Contents for Draper Storm Force PT8100SF
-
Page 1: General Information
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product. -
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 2.1 CONTENTS PAGE CONTENT PAGE TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY....................2 UNDERSTANDING THIS MANUAL ...............2 COPYRIGHT NOTICE....................2 CONTENTS CONTENTS ......................3 GUARANTEE GUARANTEE ......................4 INTRODUCTION SCOPE ........................5 SPECIFICATION ......................5 HANDLING & STORAGE ..................5 HEALTH & SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS ................6 - 7 ADDITIONAL SAFETY INFORMATION FOR SAW BLADES ........7 - 8 CONNECTION TO THE POWER SUPPLY..............8 TECHNICAL DESCRIPTION... -
Page 4: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 5: Introduction
INTRODUCTION 4.1 SCOPE Professional style wood jointing for creating solid joints in soft & hard wood, ply board, MDF & most processed timbers. It is designed for domestic and light commercial use only. Any other application is considered misuse. 4.2 SPECIFICATION Stock No.......................... -
Page 6: Health & Safety Information
HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS General Power Tools Safety Warnings WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool”... -
Page 7: Additional Safety Information For Saw Blades
HEALTH & SAFETY INFORMATION g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards. 4) Power Tool Use And Care a) Do not force the power tool. -
Page 8: Connection To The Power Supply
HEALTH & SAFETY INFORMATION – Care shall be taken when mounting tools to ensure that the clamping is by the hub of the tool and that the cutting edges are not in contact with each other or with the clamping elements. –... -
Page 9: Technical Description
TECHNICAL DESCRIPTION 6.1 IDENTIFICATION On/off switch. Auxiliary handle. Depth selector. Front rest. Blade, inner and outer flanges (Fitted). Angle locking knob. Height locking knob. Dust collection bag and dust extraction chute. Plug and cable. Blade cover plate. Spindle lock. -
Page 10: Packaging
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the biscuit jointer. -
Page 11: Basic Biscuit Jointer Operations
BASIC BISCUIT JOINTER OPERATIONS IMPORTANT: Make sure that the mains voltage FIG.1 matches the voltage stated on the machines rating plate. NOTE: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. 8.1 ON/OFF LOCKING SWITCH – FIG. 1 To switch the biscuit jointer "ON"... -
Page 12: Blade Replacement
BASIC BISCUIT JOINTER OPERATIONS NOTE: Remove the plug from the socket before FIG.5 carrying out adjustment, servicing or maintenance. 8.4 BLADE REPLACEMENT – FIGS. 4 -5 Set the height adjustment to maximum to avoid hindrance. Remove the four screws and cover plate Press the spindle lock button and turn the machine over to gain access to the underside. -
Page 13: Maintenance
MAINTENANCE 9.1 MAINTENANCE NOTE: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. The biscuit jointer does not require any special maintenance. Regularly clean/vacuum the ventilation slots. Use only a mild cleaner and a damp cloth to clean the tool. -
Page 14: Optional Accessories
10. OPTIONAL ACCESSORIES Contact your local Draper Stockist for further details. SPARE BLADES: Stock No.78458 SPARE JOINTING BISCUITS: Stock No. Part No. Item Quantity 07260 APT82E 100 (approx.) 07259 APT82E 100 (approx.) 07258 APT82E 100 (approx.) 07261 APT82E *Assorted 100 (approx.) -
Page 15: Explanation Of Symbols
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Warning! Wear dust mask. Warning! Read the instruction manual Warning! Warning! Wear suitable eye/face Wear ear defenders. protection. WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Class II construction (Double insulated). -
Page 16: Disposal
12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •... - Page 17 NOTES...
- Page 18 NOTES...
- Page 19 NOTES...
- Page 20 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Help Line for details of an agent in your local area. YOUR DRAPER STOCKIST RDCH0816...
Need help?
Do you have a question about the Storm Force PT8100SF and is the answer not in the manual?
Questions and answers