Draper PT142K User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Power Tool
  5. PT142K
  6. User manual

Draper PT142K User Manual

135w 230v with flexible drive shaft
Hide thumbs Also See for PT142K:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Instructions
INSTRUCTIONS FOR
135W 230V
Multi-Tool Kit
with Flexible Drive Shaft
Stock No.53111
Part No.PT142K
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.

GENERAL INFORMATION

These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT142K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper PT142K

Summary of Contents for Draper PT142K

  • Page 1: General Information

    AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS 2.1 CONTENTS Page content Page TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY................... 2 UNDERSTANDING THIS MANUAL ..............2 COPYRIGHT NOTICE ..................2 CONTENTS CONTENTS ......................3 GUARANTEE GUARANTEE ..................... 4 INTRODUCTION SCOPE ....................... 5 SPECIFICATION ....................5 HANDLING & STORAGE ................... 5 HEALTH &...

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

  • Page 5: Introduction

    Ideal for hobby work-tasks such as drilling, milling, grinding, engraving, cutting, polishing, sharpening, buffing and removing rust. 4.2 SPECIFICATION Stock No..........................53111 Part No..........................PT142K Rated voltage ......................230V~50Hz Rated input.......................... 135W Speed (no load) ..................... 10,000-35,000min Collet capacity ..................3(2.0, 2.4, and 3.0mm) Sound pressure level .......................

  • Page 6: Health & Safety Information

    HEALTH & SAFETY INFORMATION 5.1 GENERAL POWER TOOL SAFETY Do not overreach. Keep proper footing and balance at all times. This enables better control of WARNINGS the power tool in unexpected situations. Dress properly. Do not wear loose clothing or WARNING: Read all safety warnings and all instructions.

  • Page 7: Additional Safety Instructions

    HEALTH & SAFETY INFORMATION 5.2 ADDITIONAL SAFETY INSTRUCTIONS - Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. - Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. - Wear eye protection. - Wear dust mask.
  • Page 8 - Blank page -...

  • Page 9: Packaging

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the product.
  • Page 10 TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Hook Collet nut On/Off Switch Variable Speed Dial Spindle Lock Moulded Plug and Cable Collar...

  • Page 11: Basic Multi-Tool Operations

    BASIC MULTI-TOOL OPERATIONS 8.1 ACCESSORY INSTALLATION/ REPLACEMENT - FIG. 1 This Multi-Tool is designed for use with 1.9, 2.3 & 3.0mm shank accessories only. WARNING: Use bits of the correct shank diameter suitable for the speed of the tool. Selection of the correct accessory, suitable for the intended application is vital.

  • Page 12: Basic Multi-Tool Operations

    BASIC MULTI-TOOL OPERATIONS 8.4 APPLICATIONS: Your multi-tool can be used for drilling, grinding, polishing, milling and brushing. Other jobs like engraving, cutting and removing rust are also possible. It can be used on most wood, metal, glass and ceramics. It is a good idea to practice on a scrap piece of material. Best results are achieved by an even speed and pressure (not too hard).

  • Page 13: Maintenance

    10. MAINTENANCE 10.1 MAINTENANCE NOTE: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. The Multi-Tool does not require any special maintenance. Regularly clean/vacuum the ventilation slots. Use only a mild cleaner and a damp cloth to clean the tool.

  • Page 14: Optional Accessories

    11. OPTIONAL ACCESSORIES Stock No. Part No. Description Packed Qty 44479 APT41A Wire Brush 44480 APT42A Bristle Brush 44460 APT43A Holder for Cutting/Sanding/Grinding Disc 44473 APT44A Holder for Felt Wheels 44475 APT46A Milling Point 44476 APT47A Milling Point 44467 APT48A Diamond Grinding Point 44471 APT49A...

  • Page 15: Explanation Of Symbols

    12. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Class II construction (Double insulated) Warning! Wear suitable respiratory protection. Warning! Wear suitable respiratory protection. Warning! Wear ear defenders (During grinding operations).

  • Page 16: Disposal

    13. DISPOSAL 13.1 DISPOSAL - At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. - Contact your local authority for details of collection schemes in your area. In all circumstances: •...
  • Page 17 NOTES...
  • Page 18 - Sales Fax: (023) 8049 4209 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area. YOUR DRAPER STOCKIST RDKC170614...

Table of Contents