Integration Of Abb Ieds; Commissioning And Troubleshooting - ABB COM600 Product Manual

ABB
Grid Automation Controller
COM600
Product version: 4.0
11. Integration of ABB
IEDs
COM600 supports ABB's connectivity
package concept which simplifies system
configuration and integration of IEDs. A
connectivity package is a collection of
software and specific IED information, which
enable system products and tools to connect
and interact with the IED. The connectivity
packages reduce the risk of errors in system
integration, minimizing device configuration
and set-up times. The engineering in COM600
is done by selecting the connectivity package
for the IED version and configuration or by
importing the configuration file from the IED.
• Simulation of complete IEDs
• Source data monitoring
• Forcing of source data
• GOOSE Analyzer
• ...
• ...
Ethernet switch
REF611
REF 543
Fig. 10 Commissioning and troubleshooting
Web HMI
TCP/IP protocols
(IEC 61850, DNP3,
Modbus )
®
REF615 REF630
12. Commissioning and
troubleshooting
COM600 offers several tools and functions
to support efficient commissioning and
troubleshooting of the substation. The built-in
IED simulation functionality enables testing
and verifying of the correct operation of the
HMI and gateway configuration of COM600
without any physical connection of IEDs.
Further, communication diagnostic events can
be enabled to track all messages being sent
by or received from the IEDs.
Using the Station Automation Builder
SAB600 provided with COM600 on-line
diagnostic data, real-time process data, the
communication channels and the control
function of the IEDs can be analyzed without
separate protocol analyzers.
Web server
DNP3 Slave
HMI application
OPC Client
OPC Client
OPC Server
IEC 61850
1MRS756764 D
SCADA
IEC 61131-3
11