Manual Setting - Blaupunkt CL02 Owner's Manual

CL02

MANUAL SETTING

Under normal displaying mode, press SET button for 3
seconds to enter into time setting. The figure to be set will be
flashing. Press UP or DOWN button to adjust. The setting order
is 12/24 hr→hour→minute→year→month→date→language
display of day. Press SETbutton to confirm the setting.
If there is no operation in 30 seconds, it will turn to normal
time displaying mode automatically.
Press RESET button to restart the clock.
ALARM & SNOOZE SETTING
Under normal time display, press ALARM button for 3 seconds,
the displaying hour will flash, and press UP or DOWN button
to adjust. The setting order is hour→minute. Press ALARM
button to confirm setting. At normal time display, press
ALARM button once to turn on the alarm, the signal of is
showed on the screen. Press ALARM button again to turn off
the alarm.
The alarm sound will last for 2 minutes, and will change as
below:
0-10 seconds: BI per second
11-20 seconds: BI BI per second
21-30 seconds: BI BI BI per second
>30 seconds: keep BI
8