Pebble pebblewifi Manual page 17

Changing Wi-Fi Networks
If your pebble has been setup before you will need to clear the settings before
doing a new blinkup. To check if your pebble already has been setup:
1. Plug Pebble into AC adaptor and power on at wall
a. If pebble flashes
b. If pebble flashes any other pattern (e.g.
already been blinked up and you will need to clear it before connecting to a
new wifi source
ONLY – pebble is already cleared
ORANGE
(clearing the Pebble)
and/or GREEN) – pebble has
RED