Setting The Segment Length (Mode Seg.size) Parameter; Setting The Threading Mode (Threading) Parameter; User Configuration (User Config.) Submenu - DURKOPP ADLER 867-M PREMIUM Service Instruction

20.5.18 Setting the Segment length (Mode Seg.Size) parameter

Various settings can be made for the segment length. The possibilities are
explained in more detail in the table.
Menu item
BySize
ByCount

20.5.19 Setting the Threading mode (Threading) parameter

Various settings can be made for the threading mode. The possibilities are
explained in more detail in the table.
Menu item
Down
Up
Pedal

20.6 User configuration (User config.) submenu

Settings can be made here that are designed to make working on the
machine in various external conditions easier for the operator.
The parameters are explained in more detail in the subchapters.
The menu is divided into the following submenus:
Parameter
Language
ParameterView
Input Config
Output Config
StitchFunctions
Programs
Jog-Dial
Lock
Contrast
Brightness
118
Setting options
Seam sections are measured via the length specification (in mm).
Seam sections are measured via the stitch count.
Setting options
The sewing foot is lowered in threading mode.
The sewing foot is lifted in threading mode.
The sewing foot can be lifted or lowered with the pedal in threading
mode.
Explanation
Language selection
Parameter view
Configuration of the inputs
Configuration of the outputs
Stitch functions
Programs
Electronic handwheel
Access rights
Contrast
Brightness
Service Instructions 867-M PREMIUM - 02.0 - 02/2017
Programming
Reference
 p. 119
 p. 119
 p. 120
 p. 121
 p. 122
 p. 123
 p. 123
 p. 124
 p. 125
 p. 125