Advertisement
Chain tensioning bolts: Allows for tightening the chain or
adjustment from side to side. Make sure when tightening
only to adjust the same amount for both bolts, otherwise the
sprocket will be misaligned.
Note: Tightening the right bolt only will pull the right side of
the crank assembly toward you, tightening the left will pull the
left side toward you. Use this feature to realign the rear with
the front sprocket if needed or when changing to a new chain.
Crank arm bolts:
Loosen all 8 bolts
slightly before adjusting/
tightening chain.
The E720 Pedal: This pat-
ented design allows for usage
in both the recumbent posi-
tion and for sitting/standing
upper body workouts.
Inspection plate:
chain tension.
Warning:
chain tension by hand!
10
Open to check
Do not check
The E720 Control Arm
T-pin: The T-pin locks the con-
trol arm in any one of 72 different
positions throughout its 360 de-
gree range of motion. Pull up
the T-pin to allow the control arm
to rotate while supporting the
control arm with the other hand.
L-pin: Loosen
when rotating
the control arm
and tighten
(snug only)
once the de-
sired position
has been
reached.
Advertisement
