Table of Contents
Advertisement
Care & Maintenance
▢ After measurement, please use a cotton swab with alcohol (70% concentration) to clean the lens (on the inside of the probe).
▢ Allow the probe to fully dry for at least several minutes. Then reattach the cap.
▢ This device should be stored at a temperature between -20 to +50°C and humidity 85% or less.
▢ Keep this device dry and away from any liquids and direct sunlight.
▢ The probe should not be submerged into liquids.
NOTES
▢ The probe is the most delicate part of the thermometer. Use with care when cleaning the lens to avoid damage.
▢ Please check the device for damage if it is dropped. If you are unsure how to, please send the complete device to the nearest retailer
for recalibration.
▢ Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make body temperature
measurement lower than usual.
English 12
Advertisement
Table of Contents
