Removing The Battery - Acer Iconia A1-810 Service Manual

Removing the Battery

1. Perform the "Removing the Back Cover"
2. Disconnect the battery cable from the mainboard connector.
If a black tape is attached to the connector cable, detach the tape first and disconnect the
battery cable from the mainboard connector.
Figure 3-10. Battery Cable
3. The battery is attached to the middle frame with double-sided adhesive tapes. Slowly and
gently pry the battery off the middle frame.
NOTE:
NOTE:
If a plastic pull tab is included with battery, use the plastic pull tab to gently lift the
battery out of the tablet.
Figure 3-11. Battery
NOTE:
NOTE:
The battery module in
follow local regulations for disposal.
3-10
procedure described on page 3-7.
Figure 3-11 is highlighted in yellow. Disconnect the battery and
Machine Maintenance
0