Performing Initial Set-Up - Sony KD-65X9005A I-Manual

i-Manual
Basic Operations
Parts Description
Watching TV
Using Other Devices
Using "BRAVIA" Sync
Devices
Useful Functions
Using Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks

Performing initial set-up

Making a Connection
Connect the external USB HDD device to your TV and enjoy digital broadcast recording. If your TV
has two or more USB ports, connect the USB HDD device to the port labelled "HDD REC."
Steps
1.
Press the HOME button, then select [Settings] using the
2.
Select [System Settings] using the
3.
Select [Recording Set-up] using the
4.
Select [HDD Registration] using the
5.
Follow the on-screen instructions to register the USB HDD device.
To return to the last viewed source, press the HOME button twice.
To deregister a USB device
Press the HOME button, select [Settings] →
Deregistration], then the device to deregister.
Notes
USB HDD capacities of 32 GB at minimum are supported.
Connecting a USB HDD device via a USB hub is not supported. Connect the device directly to the
TV.
Any data stored in the USB HDD device will be erased when it is formatted during the registration
process. The USB HDD device cannot be used with a PC once it is registered to the TV. To enable
use of the USB HDD device on a PC, format it on the PC. (Note that any data in the USB HDD
device will be erased).
A maximum of 8 USB HDD devices can be registered.
Only this TV can play the data recorded on the USB HDD.
Recording is supported only for digital TV broadcast. Recording of data broadcasts or radio is
unsupported.
Scrambled signals cannot be recorded.
Recording cannot be performed in the following cases:
Top Page > Using Other Devices
/ buttons.
/ buttons, then press the
/ buttons, then press the
/ buttons, then press the
[System Settings] → [Recording Set-up] → [HDD
Font Size
Print
> Performing initial set-up
button.
button.
button.