Setting The Clock; Before Using The Remote Control - Philips MCD297/58 Quick Start Manual

Setting the clock

Important!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY ON on the set for 3 seconds
or more to switch to normal standby mode first before proceeding with the procedures below.
1
In standby mode, press and hold
2
When the hour digits flash, turn the
on the remote to set the hours.
VOL +/-
3
Press again and the minute digits flash. Then turn the
CLOCK
the front panel or press
VOL +/-
4
Press again to confirm the time setting.
CLOCK

Before using the remote control

1 Pull out the plastic protective sheet.
2 Select the source you wish to control by pressing one of the source
select keys on the remote control (for example CD, TUNER).
3 Then select the desired function (for example
Setting system menu options
DIVX(R) VOD DIVX(R) VOD
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
on the system.
CLOCK
control on the front panel or press
VOLUME -/+
on the remote to set the minutes.
ÉÅ , à , á
control on
VOLUME -/+
)
LATIN
Remove the plastic protective sheet
USB/