Life Fitness IC5 Manual page 9

HOW TO ASSEMBLE THE
INDOOR CYCLE
TORQUE WRENCH
3.
30 NM
MOUNT THE HANDLEBAR TO THE STEM WITH 2
COUNTER SUNK HEX BOLTS. TIGHTEN TO 30 NM
WITH A TORQUE WRENCH. THE BOLTS ARE
PRE-COATED WITH A THREAD LOCK WHEN
TIGHTENED FOR THE FIRST TIME. IF THE BOLTS
SHOULD LOOSEN, GLUE BOLTS WITH
LOCKTITE (R) 2701 UPON RETIGHTENING.
5.
LOCK THE THUMB LEVER.
REMOVE THE LIMIT STOP WITH A 3 MM HEX KEY.
NEVER PULL THE HANDLEBAR TOWARD THE SEAT
WHEN THE LIMIT STOP IS REMOVED. THIS WILL
DAMAGE THE INTERNAL CABLE!
6 MM BALL HEX SOCKET
4.
LOOSEN THE THUMB LEVER AND PUSH THE
HORIZONTAL SLIDER TO THE FORWARD POSITION.
6.
INSERT AND FASTEN THE END CAP WITH A CAP HEAD
SCREW AND 3 MM HEX KEY.
3 MM
2
PEOPLE
9