Adjust Settings; General Setup; Audio Setup - Philips MCD183 User Manual

6 Adjust settings

1
Press SYSTEM MENU.
2
Select a setup page.
3
Select an option and then press
4
Select a setting and then press OK.
• To return to the previous menu, press
.
• To exit the menu, press
MENU.

General setup

On [General Setup Page], you can set the
following options:
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
• [4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
• [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9] – For wide-screen TV: display
ratio 16:9.
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
[DIVX (R) VOD]
Display the DivX® registration code.
.
SYSTEM

Audio setup

On [Audio Setup Page], you can set the
following options:
[Analog Audio Setup] > [Analog Audio Setup
Page] > [Downmix]
Select audio signals output to speakers.
16:9 (Wide Screen)
[Analog Audio Setup] > [Digital Output]
Select audio formats supported by the
connected device.
[3D] > [3D Processing Page] > [Reverb Mode]
Select a virtual surround sound mode.
• [On] – Enable the screen saver.
• [Off] – Disable the screen saver.
Tip
•
Enter this DivX registration code when you rent or
purchase video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
• [L/R] – If the connected device
supports the Dolby Pro Logic
decoder, select this option.
• [Stereo] –If the sound is delivered
from the two front speakers only,
select this option.
• [3D Surround] – To apply the virutal
surround sound effect, select this
option.
• [SPDIF Off] – Turn off the digital
output.
• [All] – If the connected device
supports multi-channel audio formats,
select this option.
• [PCM Only] – If the connected
device cannot decode multichannel
audio, select this option.
EN 21