Tune To Fm Radio Stations; Program Radio Stations Automatically; Program Radio Stations Manually; Tune To A Preset Radio Station - Philips MCD183 User Manual

7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press TUNER.
3
Press and hold
4
When the frequency indication starts to
change, release the button.
»
The FM tuner tunes to a station with
strong reception automatically.
5
Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
1
Press / to select a preset number to
start programing.
2
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefl y.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The last programed radio station is
broadcast automatically.
24 EN
/ .
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confi rm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

1
Press / to select a preset number
that you want.
Tip
•
You can also use the numerical keypad to select a
preset station directly.