Detailed Component Operating Instructions - Majestic MERC32VN Owner's Manual

I. Operation During A Power Outage
Standing Pilot
The MERC32VN and MERC32VL models do not require
electrical power to operate. Electrical power is required
for accessories such as a remote control and/or fan.
Majestic • MERC32IN, MERC32IL, MERC32VN, MERC32VL Owner's Manual • 2401-981 Rev. E • 12/16
14
J. Detailed Component Operating Instruc-
tions
IntelliFire™ Ignition System
IntelliFire™, an ignition system exclusively featured in
Hearth & Home Technologies products, is an energy-
saving pilot ignition system for gas fi replaces and inserts.
It provides an ignition fl ame only when needed and has
a battery backup system that supplies power to spark the
ignition fl ame in the event of a power outage.
Intellifi re™ is an intermittent pilot ignition, which is an
electronic system. The term Intermittent is used because
the pilot burner fl ame is only present when the main
burner is operating. When the main burner is off the pilot
is also off.
NOTICE: Batteries should not be placed in the battery
pack while using the transformer. Remove batteries before
using the transformer, and unplug the transformer before
installing the batteries. Battery polarity must be correct or
module damage will occur.
Standing Pilot Ignition System
A standing pilot system includes a millivolt control valve,
standing pilot, thermopile generator, thermocouple fl ame
sensor, and piezo igniter. See Section 3.F for standing
pilot lighting instructions.
Appliance ON/OFF
A wall control, thermostat or remote control may be used
to control the ON/OFF function of the appliance. Follow
instructions included with the installed control.
Optional Fan Kit (IPI or Standing Pilot)
If desired, a fan kit may be added. Contact your dealer
to order the correct fan kit. Heat management for the fan
is discussed in Section 3.H. Detailed instructions are in-
cluded with the fan kit.