Network Diagnostics - Buffalo BS-XP20 Series User Manual

Received Octets
Received Packets
Sent Octets
Sent Packets
Show Details
The following items appear when Show Detail is clicked.
Received Octets
Received Unicast Packets
Received Multicast
Packets
Received Broadcast
Packets
Discarded Received
Packets
Received Packet Error
Sent Octets
Sent Unicast Packets
Sent Multicast Packets
Sent Broadcast Packets
Discarded Sent Packets
Notes:
• Packets that are designated to the switch (such as ping or http communication for displaying Settings) will be
displayed as "Received Unicast Packets" and "Discarded Received Packets".
• The target packets of this page are MAC frames and IPv4 packets.

Network Diagnostics

Execute a communication test to the specified IP address.
Ping
Traceroute
Note: To execute a traceroute test, configure the switch's default gateway.
Displays the number of total received octets.
Displays the number of total received packets.
Displays the number of total sent octets.
Displays the number of total sent packets.
Click to display the detailed information.
Displays the number of total received octets.
Displays the number of received unicast packets.
Displays the number of received multicast packets.
Displays the number of received broadcast packets.
Displays the number of packets that the switch received but did not forwarded to
any port.
Displays the number of packets that was discarded because of FCS error.
Displays the number of total sent octets.
Displays the number of sent unicast packets.
Displays the number of sent multicast packets.
Displays the number of sent broadcast packets.
Displays the number of packets that could not be sent.
Enter the IPv4 address and click Apply to execute a ping test to the destination.
Enter the IPv4 address and click Apply to execute a traceroute test to the
destination.
37