Ingress Filter
Protected Port
MAC Addresses
Static MAC Filtering
Configure the filtering of MAC addresses that are registered manually. Only the frames with registered MAC address
as a source MAC address can pass through the ports that the MAC address is registered to.
Static MAC Filtering
MAC Address
Port Number
Static MAC Filtering Table
Note: This function is not compatible with multicast MAC addresses, VRRP MAC addresses (00:00:5E:00:01:XX),
and broadcast MAC addresses.
Enable
Drop frames if the received frame's VLAN ID is not a member of incoming port's
VLAN.
Disable
All tagged and untagged frames will be received.
"Protected Port" enabled ports cannot communicate with each other.
Check "Enable" to enable static MAC filtering.
Enter the MAC address you want to filter. (Example: 00:11:22:aa:bb:cc)
Up to 8 addresses can be registered per port.
Select a port to apply the static MAC filter.
Displays the registered MAC addresses and port numbers.
21