Get Started; Prepare The Remote Control; Connect Power - Philips DS3150/12 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Prepare the remote control

For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
1 1
2 2

Connect power

This docking speaker can be powered on by
either AC power or batteries.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
EN
7
3 3
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1
Open the battery compartment.
2
Insert 4 x 1.5 V AA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.