Maintaining Your Vacuum; Emptying The Dust Cup - Shark ROCKET HV300 SERIES Instructions Manual

MAINTAINING YOUR VACUUM

WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: Clean the
dust screen inside the dust
cup as required.
NOTE: Empty dust cup
when debris reaches the
MAX fill line.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFV300
Clean once a month.
Post-Motor Filter
XFFV300
Clean once a year.
15
1-800-798-7398

EMPTYING THE DUST CUP

Press the Wand Release button on the top of the wand to
1
disconnect it from the handheld vacuum.
2 Hold the dust cup over a trash bin and press the "Empty"
button on the front. The bottom lid will open, allowing the
debris to fall out.
3 Once dust cup is empty, close the bottom lid.
Empty