Dodge Charger SRT 392 2017 Owner's Manual page 283

To enter Valet Mode, press the "Valet" button on the
touchscreen and a popup screen will ask you if you would
like to enter Valet Mode. After selecting "Yes", you will be
asked to enter a 4 digit PIN code. The PIN code is not set,
so you are free to select any 4 digit numeric combination
that will be easy to remember.
While in Valet Mode, the following vehicle configurations
are set and locked to prevent unauthorized modification:
• Engine limited to the lowest power output state.
• On automatic transmission, transmission locks out ac-
cess to first gear and up-shifts earlier than normal.
• Traction, steering, and suspension are set to their
STREET settings.
• Steering wheel paddle shifters are disabled.
• The Drive Mode interface is not available. Pressing the
SRT button on the touchscreen will display the unlock
keypad.
• The ESC Off button is disabled.
• The Launch Control button is disabled.
UNDERSTANDING YOUR INSTRUMENT PANEL 281
Valet Mode Deactivation
To exit Valet Mode, you must enter the same 4 digit PIN
that was used to enter the mode. The unlock keypad can be
accessed by either pushing the SRT button on the faceplate,
or pressing the "Valet Mode Active – Press Here to Exit"
button on the touchscreen.
4