Dodge Charger SRT 392 2017 Owner's Manual page 246

244 UNDERSTANDING YOUR INSTRUMENT PANEL
Setting Name
Rear ParkSense Vol-
ume
NOTE:
The Rear ParkSense Chime Volume settings can be selected from the instrument cluster display or Uconnect System.
The chime volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM.
ParkSense will retain its last known configuration state through ignition cycles.
Tilt Side Mirrors In
Reverse
NOTE:
When the "Tilt Side Mirror In Reverse" feature is selected, the exterior sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmission gear selector is in the REVERSE position. The mirrors will move
back to their previous position when the transmission is shifted out of REVERSE.
Blind Spot Alert —
If Equipped
NOTE:
• When the "Blind Spot Alert" feature is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible,
to indicate objects in your blind spot. The Blind Spot Alert feature can be activated in "Lights" mode. When this
mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the exterior
mirrors. When "Lights & Chime" mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn signal is on.
Low
Off Lights
Selectable Options
Medium
Lights & Chime
High