Audio Setup - Philips HTS4600/12 User Manual

[ Sleep ]
Switch to standby automatically after the
preset time.
• [ Off ] – disable sleep mode.
• [ 15, 30, 45, 60 mins ] – select the
count down time before it switches to
standby.
Tips
•
You can directly access to sleep timer function by
pressing SLEEP repeatedly on the remote control
until the count down time is displayed on the display
panel.
[ DivX(R) VOD Code ]
Display the DivX® registration code.
Tips
•
Enter this unit's DivX registration code when you
rent or purchase video from www.divx.com/vod.
The DivX videos rented or purchased through the
DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.

Audio setup

1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Audio Setup
Speakers Volume
HDMI Audio
CD Upsampling
Audio Sync
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
[ Speakers Volume ]
When the speakers are not placed in an
equal distance from the listening position,
change the volume level of the speakers so
that for those placed closer to the listening
position will not sound too loud.
1. To start, press OK.
2. Select a speaker in the menu, then
press b B to adjust the volume level.
3. Press OK to confi rm and exit.
Tips
•
The test tone is emitted from the speaker while
adjusting volume level.
[ Audio Setup ], then
EN 35