Advertisement
METHOD 1: 1: 1: 1: MANUAL
METHOD
METHOD
METHOD
MANUAL
MANUAL
MANUAL MEMORY
MEMORY
Press the press [VM] button to enter the frequency mode, then rotate the [TUNING] knob to tune into the stored station one
by one.
METHOD
METHOD
METHOD 2: 2: 2: 2: AUTO
METHOD
AUTO BROWSE
AUTO
AUTO
BROWSE
BROWSE MEMORY
BROWSE
1. Press the [VM] button with memory page shows in the upper right corner to enter the
frequency mode.
2. Press & hold the [VM] button until
another, staying on each station for about 5 seconds.
To stop auto search memory, simply press the [VM] button.
DELETE
DELETE
DELETE MEMORY
DELETE
MEMORY
MEMORY
MEMORY
METHOD 1: 1: 1: 1: MANUAL
METHOD
METHOD
METHOD
MANUAL
MANUAL DELETE
MANUAL
DELETE
1. Press the [VM] button to enter the memory mode.
2. Rotate the [TUNING] knob to select the memory that you want to delete.
3. Press & hold the [DELETE] button with "dEL" flashing; then press the [DELETE] button to
remove the unwanted memory address.
Note:
Note:
Note:
Note:
If "dEL" is flashing more than 3 seconds without confirmation, it will exit the delete function automatically.
METHOD 2: 2: 2: 2: SEMI-AUTO
METHOD
SEMI-AUTO
METHOD
METHOD
SEMI-AUTO
SEMI-AUTO DELETE
Feature: using the Auto-Browse function of memory to quickly delete unwanted station.
1. Press the [VM] button to enter the memory mode.
2. Press & hold the [VM] button with [PRESET] flashing to
auto scan from one memory to another, staying on each
station memory for about 5 seconds.
3. Once previewing your unwanted station, simply press the [DELETE] button with "dEL"
shows on display to delete the station, then keep on browsing other stations.
METHOD
METHOD
METHOD 3: 3: 3: 3: MANUAL
METHOD
MANUAL
MANUAL
MANUAL DELETE
DELETE
DELETE
DELETE ALL
1. Press the [VM] button to enter the memory mode.
2. Press & hold the [DELETE] button for 3 seconds and notices " ALL " flashing in the
upper right corner of display.
3. Press the [DELETE] button again to delete all memory within the selected band.
Note: If the [DELETE] button has not been pressed within 3 seconds to confirm, it
Note:
Note:
Note:
will exit the delete function automatically.
SLEEP
SLEEP
FUNCTION
FUNCTION
SLEEP FUNCTION
SLEEP
FUNCTION
1. Press & hold the [POWER] button with "
2. Rotate the [TUNING] knob immediately to select sleep timer from 1 ~ 120 minutes or
select permanently " On ", then wait till the radio auto turn
on to confirm the setting.
Note:
Note:
Note:
Note:
The default setting of the auto-turn off time is 30 minutes.
CLOCK
CLOCK
SETTING
SETTING
CLOCK
CLOCK SETTING
SETTING
1.Press & hold the [TIME] button with hour flashing, then rotate the [TUNING] knob to adjust the hour.
2.Then press the [TIME] button with minutes flashing, and then rotate the [TUNING] knob to adjust the minute.
MEMORY TUNING
MEMORY
TUNING
TUNING
TUNING
MEMORY
MEMORY
MEMORY
"
PRESET " flashing to auto scan from one memory to
DELETE SINGLE
DELETE
SINGLE
SINGLE MEMORY
SINGLE
MEMORY
MEMORY
MEMORY
DELETE
MEMORY
DELETE
DELETE MEMORY
MEMORY
MEMORY
ALL MEMORY
ALL
ALL
MEMORY
MEMORY
MEMORY WITHIN
WITHIN THE
WITHIN
WITHIN
" and "30" symbols show on the display.
THE
THE
THE BAND
BAND
BAND
BAND
- 6 -
Advertisement
