Advertisement
2. Press & hold the [FM] button with "PRESET " flashing and the frequency start running, then you can scan and
store your desired stations within the present band. When the frequency stop running, it means the ATS
operation has been completed; then rotate the [TUNING] knob for those scanned and stored stations.
MW/LW
MW/LW
MW/LW
MW/LW ATS:
ATS:
ATS:
ATS:
Press the [MW] button to select MW/LW band, then follow step 2 of FM ATS.
SW
SW
SW
SW ATS:
ATS:
ATS:
ATS:
Fully extend the telescopic antenna and press the SW[
modes for SW ATS tuning:
Mode
Mode
A:
A:
Mode
Mode A:
A: Press & hold the [
Mode
Mode
B:
B:
Mode
Mode B:
B: Press & hold the [
better location (MW & LW).
Notes:
Notes:
Notes:
Notes:
1. During ATS process in FM, MW / LW or SW (mode A), pre-stored radio stations will be replaced
automatically by the new searched stations.
2. With ATS in SW (mode B), those existing memories will not be replaced; all the newly found radio stations
would be stored in the blank memories addresses.
3. If there is too many interference in you surrounding or many mirror/blank station being stored during ATS,
you should contract the telescopic antenna (FM & SW) or rotate the radio for better location (MW & LW).
METHOD
METHOD 2: 2: 2: 2: MANUAL
METHOD
MANUAL
MANUAL
METHOD
MANUAL STORING
1. Select band and tune to your desired station.
2. Press the [MEMORY] button with "preset" flashing
3. Press the [MEMORY] button again to store the station into memory. You can also wait for 3 seconds to
auto store the station into memory.
METHOD
METHOD
METHOD 3: 3: 3: 3: SEMI-AUTO
METHOD
SEMI-AUTO
SEMI-AUTO
SEMI-AUTO STORING
While operating the "Auto Browse Station" function, you can simply press on the [MEMORY] button to store
the station into memory to avoid storing unwanted stations and
interfering signals.
Press the [VF] button to switch into frequency mode.
Press & hold the [VF] button with "
another.
While tuning to your favor station, press the [M] button with "PRESET " flashing to
direct store the station into the next available memory. The unit will keep on browsing
until you deactivate it by pressing on the [VF] button again.
LISTENING
LISTENING
TO
TO
STORED
STORED
LISTENING
LISTENING TO
TO STORED
STORED STATIONS
] button to ATS the stations within all meter bands
] button to ATS the stations within present meter band only.rotate the radio for
STORING
STORING
STATON
STATON
STORING STATON
STATON
STORING STATION
STORING
STORING
STATION
STATION
STATION
" advancing to auto browse from one station to
STATIONS
STATIONS
STATIONS
] or [
] button to select SW band. There are two
- 5 -
Advertisement
