Advertisement
2. Press & hold the [ETM] button until the frequency start running to auto scan and store stations into ETM
memory, within the present band.
3. When the frequency stop running, turn around the [TUNING] knob to select those stored stations.
Notes: While operating ETM to search for stations, a few stations might be missed if there is interference in the
Notes:
Notes:
Notes:
surrounding. In this case, you can simply key-in the frequency, then press the [ETM] button to manually store it into
ETM memory.
T T T T IPS
IPS
IPS
IPS: : : :
FM
FM
FM station:
FM
station:
station: When you are in a different city or country, you should perform the ETM function again in stead of
station:
using ATS function, because this will not delete any of the stations already stored within the memory.
MW station:
MW
MW
MW
station:
station: It is recommendable to perform the ETM function during night time, because there are usually many
station:
stations starting broadcasting at night.
SW
SW
SW station:
SW
station:
station:
station: It is recommendable to perform the ETM function in the morning, afternoon as well as night time,
because the transmitting signal of SW is very unstable and usually there are more stations that start broadcasting in
the late afternoon.
METHOD
METHOD
METHOD
METHOD 2: 2: 2: 2: MANUAL
MANUAL TUNING
MANUAL
MANUAL
TUNING
TUNING
TUNING
Frequency
Frequency
Frequency
Frequency searching:
searching:
searching:
searching: Press the [VF] button to switch into frequency mode, and then rotate the [TUNING] knob to
select your desired station.
FAST/SLOW tuning is shown in the chart below for each band.
Slow tuning mode
Band/Step
Turning step
FM
0.01MHz
MW
1kHz
LW
1kHz
SW
1kHz
SW
SW
SW
1kHz
1kHz
1kHz
Memory
Memory
Memory searching:
Memory
searching: Press the [VM] button to switch into memory mode, and then rotate the [TUNING] knob to
searching:
searching:
select those stored stations.
METHOD
METHOD 3: 3: 3: 3: AUTO
METHOD
METHOD
AUTO BROWSE
AUTO
AUTO
BROWSE
BROWSE STATION
BROWSE
1.Turn on the radio and press the [VF] button to switch into frequency mode.
2.Press & hold the [VF] button with [
for about 5 seconds.
3.To stop the auto browse function, simply press the [VF] button.
While operating the
N o t e :
N o t e :
N o t e :
N o t e :
station into memory, and the radio will keep on auto browsing the next available station.
WORKING
WITH
STATION
WORKING
WORKING WITH
WORKING
WITH
WITH STATION
STATION MEMORIES
STATION
There are total 550 preset memories within the unit. 100 preset memories for each FM,
MW, and LW band, and 250 for SW.
FM
FM ATS:
FM
FM
ATS:
ATS:
ATS:
1. Fully extend the telescopic antenna and press the [FM] button to select FM band.
Turning
Turning
Turning
Turning step
0.1MHz
0.1MHz
0.1MHz
0.1MHz
9/10kHz
9/10kHz
9/10kHz
9/10kHz
9kHz
9kHz
9kHz
9kHz
5kHz
5kHz
5kHz
5kHz
STATION
STATION
STATION
] advancing to scan from one station to another, staying on each station
"
Auto Browse Station" function, you can press the [M] button anytime to store the
MEMORIES
MEMORIES
MEMORIES
Fast
tuning
mode
Fast tuning
Fast
Fast
tuning mode
tuning
mode
mode
step
step
step
- 4 -
Advertisement
