Advertisement
Only limited FM stations can be
received in Japan.
Received very poor AM in USA.
When the alarm activated (alarm
by radio), there is only noise with
the broadcast.
radio alfunction.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Frequency range
FM
MW
LW
SW
Sensitivity
FM (S/N=30dB)
MW (S/N=26dB)
LW (S/N=26dB)
SW (S/N=26dB)
Selectivity
FM
MW
LW
SW
FM Stereo crosstalk
Memory
Output (Distortion 10%)
Speaker
Earphone Jack
Power
Speaker
Earphone Jack
Dimensions Approx.
Weight
Web:
-FM frequency is 76~90MHz for
Japan.
-USA is using 10kHz step for AM.
-Did not set the proper radio station for the
alarm.
-Or there are no broadcasting at that radio
station.
-Or you are in another city where does not
have a radio station for your preset
frequency.
This may caused by interference, and the
computer microchip not function properly.
87~108 MHz
Russia 64~108MHz
Japan 76~1 08 MHz
Eu, USA 87.5~108 MHz 522~1620 (USA 520~1710) kHz
153~513 kHz
2300~21 950 kHz
Less than 3μV
Less than 1mV/m
Less than 10mV/m
Less than 20μV
＞60 dB
(±150kHz)
＞60 dB
(BW=3kHz, ±9kHz)
＞60 dB
(BW=3kHz, ±9kHz)
＞60 dB
(BW=3kHz, ±5kHz)
Less than 25 dB
550
≥230 mW
≥20 mW
UM3 or AA X 2
USB 5V DC
φ57mm, 250mW/8 Ohm
φ3.5mm, 32 Ohm, Stereo type
127(W) X 82(H) X 28(D) mm
175g (Batteries not included)
http://www.elecsky.com
-Turn the radio off and press & hold
the [FM] button press [FM] button
again to select 76~108MHz.
-Turn off the radio press the [9/10kHz]
button to select 10kHz.
-Preset your alarm station properly
(see the above setting).
-Make sure it has radio broadcast in
your location.
Remove the battery, then you can
reload. If it is still not able to work,
please contact
your nearest dealer for customer
service.
Email:
info@elecsky.com
- 10 -
Advertisement
