Replace Fuse; Servicing; Safety Precautions - MEDIX AC2000 Instructions Manual

6.

6 Replace Fuse

1. Switch off at mains.
2. Using a screwdriver or a coin, push and twist fuse in an anti-clockwise direction to
extract fuse.
3. Replace with new fuse.
6.

7 Servicing

In order to maintain your warranty, your unit is required to be serviced by an approved service agent
every 12 months. Please contact the manufacturer or distributor for details of your nearest authorised
service agent.
Warning: Disconnect power supply before servicing. When servicing, use only identical replacement
parts. Not suitable for use with flammable anaesthetics.
Caution: Do not immerse in water.
Please Note: When returning your nebuliser for servicing to Clement Clarke International, please
contact customer services for an authorised returns number.
Please do not return your consumables when returning your nebuliser for servicing.
The nebuliser case should be wiped clean with an alcohol wipe or similar, before returning
for servicing.
Please ensure wipe solution is compatible with ABS plastics.

7. Safety Precautions

• Always disconnect from electricity supply before undertaking any maintainance or cleaning.
• Never operate the unit where it may come into contact with water.
Should this happen, switch off at mains and unplug immediately.
• Never block air intake grills on the carrying case.
• Always keep electrical leads clear of heated surfaces.
• Position the unit on a clean surface. Do not place on carpet where fibres can be drawn into the
unit when in use.
• Avoid using in a room where people smoke.
• Store in a clean, dry, dust free environment at room temperature.
• Not suitable for use with flammable anaesthetic gases.
• Do not modify the equipment or its accessories in any way.
• Do not allow liquid to enter the mains input socket.
en
7