Table of Contents
Advertisement
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the menus are listed below.
Menu items in the Stand-alone mode only:
– SI Vendor : Smoovie
– REACH Server and its submenus.
Menu items in the Interactive mode only:
– SI Vendor: Samsung and other vendors.
All other items appear in both menus
To access the menus, press
After a menu appears, follow these general directions to navigate and change values:
– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.
– Press the
ENTER
– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left
arrow button decreases numerical values.
– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
– Press the
RETURN
– To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,
then unplug the TV, wait for the Standby light to go off, and then plug the TV in again.
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
<Depending on model and region, some menu items may not exist.>
To change menus, follow these steps:
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive
to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎ After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 19.
12
English
[HC460-ZA]Install-Guide-X0ENG.indd 12
Setting the Hotel Option Data
MUTE
→
1
→
1
→
9
→
ENTER
or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.
or
button to exit the current menu item and go to a higher menu level or the Main menu.
MENU
Standalone
System
OFF
Above: The Hotel mode menu
E on your Samsung remote.
2014-06-05
10:39:08
Advertisement
Table of Contents
