PLUS
HVLA1K3
USERS MANUAL
Don't turn ON the amplifier before connected the ANTENNA; a hazardous RF voltage may be
present on the antenna connector with no antenna connected.
Don't disconnect an antenna during transmission; fire or electric shock may be possible.
Don't expose the amplifier to rain, snow or any other liquids; fire or electric shock may be possible.
Don't touch the case of the amplifier with damp or wet hands; electric shock may be possible.
The amplifier may cause interference and it can influence other electrical appliances. In such cases
the user must be take proper actions to reduce the interference.
Before opening the cover of the amplifier wait an hour after transmission; the heat generated by
the internal components of the amplifier may cause burns to your hands.
Don't install the amplifier in a place without a very good ventilation; the poor heat dissipation
generated, in this situation, may damage the amplifier.
Page 2
Need help?
Do you have a question about the HVLA1K3 PLUS and is the answer not in the manual?