Page 1
ITEM NUMBER 1434DD _ _-_ _ ALPINE COLLECTION PRESSURE BALANCED TUB AND SHOWER WITH “DD” HANDLE PART DESCRIPTION PART # Complete Shower head * P0285 Shower Arm * P0286 P0287 Shower Flange * 00YY-DD-R Complete DD Handle for Shower * PH29750 Tub/shower Trim Plate * Complete Wall Mount Tub Spout *...
INSTALLATION INSTRUCTIONS 1434DD _ _ DESCRIPTION This product is precision engineered to provide satisfactory performance provided it is installed and operated in accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the reliability of your pressure balancing valve, be certain to familiarize yourself with the contents of this manual.
Page 3
INSTALLATION INSTRUCTIONS 1434DD _ _ HANDLE BELL HANDLE FLANGE HANDLE TRIM INSTALLATION - Place the shower plate onto the all thread. - Screw the handle bell and flange onto the all thread, make sure that both parts are flushed firmly against the plate. Mark the position and remove the handle bell and flange and cut off the excess thread.
1434DD _ _ TEMPERATURE LIMIT STOP SET UP MECHANICAL STOP -Santec Pressure Balanced Valve has a temperature limit stop ( please see Illustration C) LIMIT STOP which once set properly can provide a safe and comfortable hot water. Below is the limit stop installation procedure: STOP POST - Remove all Handle trim parts, including the trim plate.