Using S-Video Jack; Using An Accessory Rf Modulator - Philips DVP533K User Manual

COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr) AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1
VIDEO OUT
MAINS
S-VIDEO OUT
COMPONENT
VIDEO OUT
IMPORTANT!
– S-Video connection provides
better picture quality. This option
must be available on your TV.

Using S-Video jack

1
Use the S-video cable to connect the
DVD system's S-VIDEO OUT jack to
the S-Video input jack (or labeled as Y/C
or S-VHS) on the TV (cable not supplied).
2
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
01-34 DVP533K_78
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
2
Y
L
Pb
R
Pr COAXIAL
DIGITAL OUT AUDIO OUT
1
2
9
Connections
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
ANT IN TO TV AUDIO IN
VIDEO
IN
R L
CH3 CH4
Antenna or
Cable TV signal
1
VIDEO OUT Y
L
Pb
S-VIDEO OUT R
Pr COAXIAL
COMPONENT DIGITAL OUT AUDIO OUT
VIDEO OUT
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

Use the composite video cable (yellow) to
connect the DVD Player's CVBS (VIDEO
OUT) jack to the video input jack on the
RF modulator.
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's
RF jack.
19/03/2004, 2:55 PM
9
8239 300 32131