Table of Contents
Advertisement
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the bottom of the product.
1
Connect the AC power cable:
•
to this product.
•
to the wall outlet.
4 Get started
Prepare the remote control
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove batteries if they are exhausted or if the remote
control is not to be used for a long time.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel (refer to the TV user manual
on how to select the correct channel).
Select menu display language
Note
•
If this product is connected to a HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
•
The language options may vary from different
regions.
1
Press SETUP.
» [General Setup] menu is displayed.
2
Select [OSD Language], then press .
3
Press
to select a language, then press OK.
Turn on progressive scan
Note
•
To use the progressive scan feature, you must connect
a progressive scan TV with the component video jacks
(see "Connect" > "Connect video cables" > "Option 2:
Connect to the component video jacks" for details).
1
Turn on the TV to the correct viewing channel
for this product.
2
Press SETUP.
3
Press
to select [Video Setup].
EN
9
Advertisement
Table of Contents
