ZyXEL Communications NAS326 User Manual page 269

Step 3 Destination
Use this screen to set where you want the backup to be stored.
Figure 217 Backup Planner > Backup: Add Job Step 3 Destination
The following table describes the labels in this screen.
Table 152 Backup Planner > Backup: Add Job Step 3 Destination
LABEL DESCRIPTION
Destination Select the target folder where you want to place your backup.
Internal Select this if you want to place your backup in another volume in the NAS. Select an (internal)
volume and the folder where you want to place the backup.
External Select this if you have a USB hard disk connected to the NAS that you want to use for your
backup. Select the folder where you want to place the backup.
Chapter 16 Backup Planner
NAS Series User's Guide
269