Configure Daylight Saving Time - ZyXEL Communications NAS326 User Manual

Table 87 Control Panel > System > Date/Time (continued)
LABEL
Date/time
Synchronize with
time server
Time server
address
Synchronize
Now
Apply
Reset

9.5.2 Configure Daylight Saving Time

Click Control Panel > System > Date/Time >Daylight Saving Time to open the following screen.
Figure 121 Control Panel > System > Date/Time > Daylight Saving TIme
Chapter 9 Control Panel: System
DESCRIPTION
This field displays the last updated date and time from the time server or the last date and
time configured manually.
When you set Date/time setting to Manually, enter the new date and time in this field and
then click Apply.
Select this option to have the NAS get the time and date from the time server you select in
the Time server address field.
Select a time server from the drop-down list box. Check with your ISP/network administrator if
you are unsure of this information.
Click this for the NAS to retrieve the correct time from the configured time server right away.
Click this to save your changes. If you configured a new time and date, Time Zone and
Daylight Saving at the same time, all of the settings take affect.
Click this to restore your previously saved settings.
NAS Series User's Guide
151