ZyXEL Communications NAS326 User Manual page 174

Note: You may need to configure any firewalls between the NAS and the syslog clients in
order to let the syslog traffic go to the NAS.
Click Control Panel > Service > Syslog Server to open the following screen.
Figure 145 Control Panel > Service > Syslog Server
The following table describes the labels in this screen.
Table 103 Control Panel > Service > Syslog Server
LABEL DESCRIPTION
Enable Syslog Server Select this to have the NAS accept syslog logs from syslog clients. Clear it to stop the NAS
from accepting syslog logs from syslog clients.
Log Location Click View Files to browse to where you want to store the syslog logs on the NAS after you
click Apply.
Share Select the share in which to store the syslog logs.
Chapter 10 Control Panel: Service
NAS Series User's Guide
174