Checking The Sewing Pattern - Brother BAS-326H-484 Basic Operation Manual

5. USING THE LCD PANEL (BASIC OPERATIONS)

5-4. Checking the sewing pattern

Use test feed mode to operate the feed mechanism in order to check the needle movement.
Check that the needle hole does not come out from the frame of the work clamps.
1
The Test key is displayed in blue.
[Sewing operation screen]
(1)
2
Continuous test feed
Work clamp switch (2-step)
Single stitch check
36
Start switch
(2)
BAS-326H-484, BAS-326H-484 SF
1. Touch the Test key at the [sewing operation
screen].
2. Touch the △ or ▽ key (1) to set the program
number that you would like to check.
3. Lower the work clamps (and the intermittent
presser foot) before depressing the start
switch.
Home position detection will be carried out.
1. If you lower the work clamps (and the
intermittent presser foot) and then depress
the start switch, the feed mechanism starts
moving continuously one stitch at a time.
(The stitch number
decremented by one stitch at a time.)
2. When the feed reaches the end of the pattern,
it stops.
・ If you would like to stop the feeding operation,
touch the Continuous feed stop key.
・ Touch the Move to sewing start key (2) to
return to the sewing start.
Touch to move back by one stitch.
Touch to move forward by one stitch.
Fast-forward
display will be
4923Q