Optional Audio Connections; Connect Usb Flash Drive; Connect Power; Get Started - Philips DVP3526 User Manual

1
Connect a composite video cable (supplied)
to:
• the TV OUT jack on this product.
• the video input jack on the TV.
2
Connect the audio cables (supplied) to:
• the AUDIO OUT FRONT L/R jacks on
this product.
• the audio input jacks on the TV.

Optional audio connections

Connect the audio from this product to other devices
to enhance sound.
Connect multi channel receiver
1
Connect the audio cables (not supplied) to:
• the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
• the audio input jacks on the device.
Connect an analogue stereo system
FRONT L
FRONT R
1
Connect the audio cables (supplied) to:
• the AUDIO OUT FRONT L/R jacks on
this product.
FRONT L REAR L
CENTER
FRONT R REAR R SUBWOOFER
MULTICHANNEL
AUDIO IN
AUDIO IN
• the audio input jacks on the TV.
Connect USB flash drive
1
Connect a USB flash drive to the
this product.
Note
•
This product can only play/view MP3, WMA, or JPEG
files that are stored on a USB flash drive.
•
Press the button to access the content and play
the files.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the product.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.

4 Get started

Prepare the remote control

1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
jack on
EN 7