Dell Wyse 3040 Thin Client User Manual page 42

Parameter
Protocol
Username
Password
Published Application
Enable interactive mode
Ping before connect
Enable NLA
Secure connection
Domain
Desktop
Application
4. The following options must be configured in the Experience tab:
42
Description
From the drop-down list, select the specific protocol.
Enter the User ID that is used to log in to the remote Horizon
server.
Enter the password that is used to log in to the remote
Horizon server.
Click the ON/OFF button to enable or disable this option.
If enabled, specify the Published Application name.
If disabled, specify the Published desktop name.
Click the ON/OFF button to enable or disable this option.
If enabled, then after a successful connection to the server, it
displays all the published application and desktop icons. You
can start the applications or desktop sessions based on your
choice.
If disabled, then the Published Applications option is enabled
in the Login tab.
Selecting that option enables you to directly start the
application or desktop that you specify.
Click the ON/OFF button to enable or disable this option. If
enabled, it pings the connection is checked in server IP/
FQDN before connecting to a session.
Click the ON/OFF button to enable or disable this option.
Enable the Network Level Authentication (NLA), if NLA is
enabled on your remote computer. Your remote computer
requires NLA user authentication before you establish a full
Remote Desktop connection and the login screen is displayed.
Click the Secure Preferences tab and select any of the
options that determine how the client should proceed when it
cannot verify that your connection to the server is secure.
Enter the Domain name. It is used to log in the remote
Horizon server.
If interactive mode is disabled, you can specify Published
desktop name.
If interactive mode is disabled, you can specify the Published
application name.