Advertisement
FreeWave Technologies
April 10, 2009
LIG0011AA Rev A
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20000-FreeWave-LRS455-CE-Radio-Licensed-Serial-400-MHz-Radio-Enclosed.aspx
400 MHz Licensed Installation Manual
FreeWave Technologies, Inc.
400 MHz Wireless Modem
Installation Guide
1 of 6
V1.0
Advertisement
Table of Contents
Related Manuals for FreeWave LRS455 SERIES
Summary of Contents for FreeWave LRS455 SERIES
- Page 1 FreeWave Technologies 400 MHz Licensed Installation Manual April 10, 2009 V1.0 FreeWave Technologies, Inc. 400 MHz Wireless Modem Installation Guide 1 of 6 LIG0011AA Rev A Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com http://www.remotesiteproducts.com/p-20000-FreeWave-LRS455-CE-Radio-Licensed-Serial-400-MHz-Radio-Enclosed.aspx...
- Page 2 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification or changes to this device without the express approval of FreeWave Technologies may void the user’s authority to operate this device. Furthermore, this device is intended to be used only when installed in accordance with the instructions outlined in this manual.
- Page 3 FreeWave Technologies 400 MHz Licensed Installation Manual April 10, 2009 V1.0 Models LRS-455-C and LRS-455-CE GENERAL: The devices covered by this Report are wireless data transceivers. They must be installed in a suitable enclosure. Conditions of Acceptability – When installed in the end use equipment, the following considerations are to be examined: 1.
- Page 4 Placement of the FreeWave transceiver is likely to have a significant impact on its performance. In general the rule of thumb with FreeWave is that the higher the placement of the antenna the better the communication link - height is everything! In practice you should also place the transceiver away from computers, telephones, answering machines, and other similar equipment.
- Page 5 FreeWave Technologies 400 MHz Licensed Installation Manual April 10, 2009 V1.0 continuous current. The pin #1 of the 10-pin connector on the transceiver is the positive lead; pin #4 or pin #6 of this connector should be as a negative lead.
- Page 6 FreeWave Technologies 400 MHz Licensed Installation Manual April 10, 2009 V1.0 6 of 6 LIG0011AA Rev A Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com http://www.remotesiteproducts.com/p-20000-FreeWave-LRS455-CE-Radio-Licensed-Serial-400-MHz-Radio-Enclosed.aspx...
Need help?
Do you have a question about the LRS455 SERIES and is the answer not in the manual?
Questions and answers