Dismantling Instructions; Dismantling Of The Cassette Cover; Dismantling Of The Cdc Module And Front Panel - Philips FW-V720 Service Manual

www.freeservicemanuals.info

DISMANTLING INSTRUCTIONS

Dismantling of the Cassette Cover

2. Twist screw driver
3. Lift up and out
1. Place screw driver
Remove Cassette Cover

Dismantling of the CDC Module and Front Panel

1) Loosen 4 screws to remove the Cover Top (pos 255) of the
set.
2) Loosen 3 screws to remove the Panel Left (pos 253) and
3 screws to remove the Panel Right (pos 254) of the set.
3) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
3-1
(flat side) between
the cassette cover
& cassette door
Cassette Cover
Sliding out the CDC Tray
Dismantling of the CDC Module and Front Panel
4) Remove the Cover Tray VCD (pos 106) as indicated.
5) Loosen 2 screws A and 2 screws B to remove the CDC
Module (pos 1105) as indicated.
6) Remove 2 screws (pos 226) at the bottom to separate the
Front Panel Assembly from the Plate Bottom (pos 265).
Separating the MPEG and the CDC Module
1) Remove 4 screws P to remove the MPEG shield & MPEG
Board.
2) Remove 2 screws M and uncatch C3 with a flat screw-
driver in the direction as shown to loosen the Plate
Insulator.
Published in Heiloo, Holland.
3-1
Remove Cover Tray VCD
Front View CDC
Remove CDC Module
P
C3
M
1/3/16