Calibrating The Battery - Acer ExtensaTM 670 User Manual

Calibrating the Battery

3. Turn the computer power ON, if not already
on.
4. Exit the Windows operating System to DOS.
a) From Windows 95, Exit by selecting
Restart in MS-DOS Mode from the
Shutdown menu.
b) From Windows for Workgroups, Exit by
selecting FILE then EXIT WINDOWS from
the Program Manager.
5. Enter Setup by pressing the Setup hot key
(Fn+F1).
6. Set the
POWER MANAGEMENT FUNCTION
parameter and the
parameter to Disabled.
7. Save the changes, then Exit Setup.
8. Allow the computer to run down completely
until it powers off on its own.
9. Re-connect the AC power.
10. Turn the Computer back ON. Enter Setup
by pressing Fn+F1.
11. Set the
POWER MANAGEMENT FUNCTION
parameter and the
parameter to your preferred settings.
12. Recharge the battery.
BATTERY LOW SUSPEND
BATTERY LOW SUSPEND
3-9