0V Suspend Mode - Acer ExtensaTM 670 User Manual

0V Suspend Mode

0V Suspend mode saves the exact spot you are
at on your computer, then removes all power
without losing any data.
In 0V Suspend mode, the computer saves the
current computer state onto your hard disk
drive then shuts off. When you turn the
computer on again, it restores the computer to
the saved state within about a minute.
Press the 0V Suspend hot key (Fn+F2) to enter
0V Suspend mode. To resume normal operation,
press the power switch. 0V Suspend mode
occurs automatically if the
parameter in Setup is enabled and
TIMEOUT
times out or if the
enabled and your battery runs down to a
critically low level.
Note: Your computer will not enter 0V Suspend
mode if the 0V Suspend file is missing or is the
incorrect size. Refer to Chapter 2, Adding Memory
section for further information.
5V Suspend Mode
5V Suspend mode consumes very little power
when you are not using your computer, yet still
resumes quickly. With a fully charged battery,
your computer can remain in 5V Suspend mode
for days.
Power Saving Modes
BATTERY LOW SUSPEND
0 VOLT SUSPEND
option is
1-11