Installation - AEG MC1753E User Manual

28 www.aeg.com

9. INSTALLATION

The microwave can be fitted in
position A, B, C or D:
9.1 Installing the appliance
4 mm
Measurements in (mm)
1. Remove all packaging and check carefully
4 mm 2. This oven is designed to fit into a 360 mm
4 mm
3. Fit the fixing hooks to the kitchen cupboard
4. Fit the appliance into the kitchen cupboard
5. Ensure the appliance is stable and not
Niche size
Position
W
A 562 x 550 x 360
B+C
462 x 300 x 350
462 x 300 x 360
562 x 300 x 350
562 x 300 x 360
D 462 x 500 x 350
462 x 500 x 360
562 x 500 x 350
562 x 500 x 360
for any signs of damage.
high cupboard as standard. When fitting
into a 350 mm high cupboard:- Unscrew
and remove the 4 feet from the bottom of
the oven. There are 3 tall feet and 1 short
foot. Replace the 3 tall feet with those
provided in the accessory pack. Do not
replace the short foot.
using the instruction sheet and template
supplied.
slowly, and without force. The appliance
should be lifted onto the fixing hooks and
then lowered into place. In the case of
interference during fitting, this hook is
reversible. The front frame of the oven
should seal against the front opening of the
cupboard.
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and the
top of the frame (see diagram).
D H