EVERSPRING SE812 User Manual

SE812 INDOOR SIREN
The Indoor Siren is a Z-Wave™ enabled device and is fully compatible with any
Z-Wave™ enabled network. Z-Wave™ enabled devices displaying theZ-Wave™
logo can also be used with it regardless of the manufacturer, and ours can also
be used in other manufacturer's Z-Wave™ enabled networks. Inclusion of this
Indoor Siren on other manufacturer's Wireless Controller menu allows a full
alarm condition to be generated once a connected Z-Wave™ enabled device
has been triggered. Z-Wave™ enabled devices (refer to nodes) in the system
also act as repeaters, so as to re-transmit the RF signal to ensure that the signal
is received by its intended destination by routing the signal around obstacles and
radio dead spots.
The Indoor Siren integrates both functions of siren and strobe into one unit.
Two sound levels, 100dB and 90dB, are available for selection. When it
receives a RF command, it will either activate its sounder and flash lights or stop
these visual and audible alarm indications.
Product Overview
J
Front View
Side View
Rear View
® LED Indicator
© Tamper Switch
® Red Strobe Light
<§> Link Key
(D Two-Phase Sound Jumper Link
© DC Jack
© Tamper Jumper Link