Table of Contents
Advertisement
10
Definition and Function Description of Keys on Remote Control
4. -/--
-/--
5. QV
6. MUTE
Switch the program digit.
Press [-/--] to choose the digits of the program number among
1 2 and 3 before pressing number keys [0]~[9]: the program digits
will change as follows: -
In the state of two digits entering, the program number will change to the first digit
entered if the second digit is not entered within 3 seconds after entering the first one. While
in state of three digits entering, the program number will automatically change if the second
or third digit is not entered within 3 seconds after entering the first or second one.
Jump back to the previous program or source.
Pressing this key to mute the speakers, press it again to unmute.
In the mode of mute, the screen displays as the right picture.
- -
- - -
-
--
Advertisement
Table of Contents
